Product Information

Wood Joiner Biscuits

1. Bix Wood Joiner Biscuits are made from the finest quality Australian Hoop Pine, kiln dried to ensure a stable and reliable product for all biscuit joining applications.
2. Strict quality control ensures consistent product size and thickness of Bix Wood Joiner Biscuits
3. Bix wood joiner biscuits are stamped at an angle of 45 degrees to the grain of the timber, providing maximum resistance to sheering, splitting and flexing.
4. During the pressing process, each Bix wood joiner biscuit is compressed slightly. When moistened with PVA glue, the biscuit expands in the slot to ensure a tight join.
5. Each Bix wood joiner biscuit is impressed to create a glue track to ensure even distribution of glue in the slot.
6. Timber joins using Bix wood joiner biscuit are designed to improve the strength of the joint when strength is a critical factor in construction.

Slot Cutter and Arbor

Exclusive to Bix Products, the Tungsten Carbide Tipped Cutter  is designed to deliver a consistent, accurate depth of cut for the life of the blade.

1. The cutter is made to suit a range of commercially available routers with either a 1/4" or 1/2" chuck.
2. The cutter is used in conjuction with the Bix Size 5 wood joiner biscuit.
3. Use the 40mm x 4mm cutter blade and either the 1/4" or 1/2" arbor to suit your router.
4. The cutter and Size 5 biscuit are ideal for use in situations where slot room is limited e.g. Rail & Stile or Rail & Mullion.

Also exclusive to Bix Products, the 1/4" or 1/2" Shanked Arbor to suit your router. Each arbor has an in-built depth gauge to make the slot the correct depth to take the BIX Size 5 biscuit.

BIX Wood Joiner Biscuits suit everyone, from the handyman
to the professional tradesman